This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Hobbelen, D.G.E. Articles by Wisse, M. Search for Related Content Social Bookmarking                   What's this?

Controlling the Walking Speed in Limit Cycle Walking

Department of Mechanical Engineering, Delft University of Technology, 2628CD Delft, The Netherlands, d.g.e.hobbelen{at}tudelft.nl

M. Wisse

Department of Mechanical Engineering, Delft University of Technology, 2628CD Delft, The Netherlands

"Limit Cycle Walking" is a relatively new paradigm for the design and control of two-legged walking robots. It states that achieving stable periodic gait is possible without locally stabilizing the walking trajectory at every instant in time, as is traditionally done in most walking robots. Well-known examples of Limit Cycle Walkers are the Passive Dynamic Walkers, but recently there are also many actuated Limit Cycle Walkers. Limit Cycle Walkers generally use less energy than other existing bipeds, but thus far they have not been as versatile. This paper focuses on one aspect of versatility: walking speed. We study how walking speed can be varied, which way is energetically beneficial and how walking speed affects a walker's ability to handle disturbances (that is, disturbance rejection). The study is performed using one prototype and one simulation model. The speed of these two walkers is adapted by changing three parameters: the amount of ankle push-off, upper body pitch and step length. The study has resulted in four conclusions. (1) Steady-state speeds between 0.24 and 0.68 m s^-1 (for a 0.6 m leg length) were obtained, with loss of stability determining the lower limit and actuation limits determining the upper limit. This result shows the applicability of Limit Cycle Walking for versatile walking machines. (2) For any speed, powering the gait by leaning the body forward costs less energy than using ankle push-off. (3) In contrast to the apparent tradeoff between speed and stability in traditional walking robots, in Limit Cycle Walking we find that increasing the walking speed, independent of how this is done, automatically results in an increasing disturbance rejection. (4) A combination of feedforward actuation adjustment and step-to-step feedback from walking speed shows that it is possible to change walking speed in only a few steps and maintain a desired speed when performing tasks such as carrying loads and walking on slopes. In particular, this fourth conclusion underlines the applicability of the concept of Limit Cycle Walking for versatile two-legged walking machines.

Key Words: limit cycle walking • versatility • walking speed • energy efficiency • disturbance rejection • load carrying • slope walking

The International Journal of Robotics Research, Vol. 27, No. 9, 989-1005 (2008)
DOI: 10.1177/0278364908095005


CiteULike    Connotea    Del.icio.us    Digg    Reddit    Technorati    What's this?